InvariSuede

InvariSuede Titanium is a moderately low gloss textured finish, available in titanium, that is designed for use in architectural applications.  It can be applied to wall panels, coping and trim.  Since InvariSuede has a dirt-resistant surface with no coatings to deteriorate, it will last indefinitely with little maintenance.

 

 

Grade Selection
Optimal performance of InvariSuede is assured by its highly engineered properties, which appear in Table I of the InvariSuede Titanium data sheet.  Grade 2 is appropriate for most applications.  Other grades may be considered where design parameters such as wind resistance require elevated mechanical properties.  It should be noted that grades with higher mechanical properties will be somewhat more difficult to fabricate.  For most applications, Grade 2 offers a practical balance between formability and strength.  InvariSuede is at home in severe environments, such as seacoast atmospheres subjected to salt water spray.

Pounds per piece
Thickness (in.) x Width (in.) x Length (in.) x .163

Available Sizes
Coils and cut lengths up to 288" are available.

Typical Surface Characteristics
Spectral Gloss @ 85° ……………………………………………..……………….  <20
Ra …………………………………………………………………………………..…….… 85
Peak count per square inch ………………………………………………....… 200

Fire Resistance
Titanium is a high melting point alloy system which will provide superior resistance to fire damage than lower melting point alloys and combustible materials.

Flatness
InvariSuede is supplied within five I units of flatness, which is well below standard commercial allowances.

 

> Click here to download a complete Data Sheet for this product, which includes all of the above text, PLUS additional Fabrication, Installation, Maintenance, Environmental Impact information and more!